meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:mechanic:nanolockitbracket [2024/11/01 17:25] – sben:mechanic:nanolockitbracket [2024/11/11 14:11] (current) – external edit 127.0.0.1
Line 7: Line 7:
 [[{}!http://www.2eyetec.com/en/lockit-bracket.html|Buy me]] [[{}!http://www.2eyetec.com/en/lockit-bracket.html|Buy me]]
 ===== Description ===== ===== Description =====
-{{  :nanolockit.svg?150}}Bracket for mounting a [[http://ambient.de/en/products/acn-nl-l-nanolockit-timecode-logging|AMBIENT NanoLockits]] or [[http://ambient.de/en/products/acn-cl-lockit-timecode-und-syncgenerator|AMBIENT Lockits]]+{{  :nanolockit.svg?150}}Bracket for mounting a [[http://ambient.de/en/products/acn-nl-l-nanolockit-timecode-logging|AMBIENT NanoLockit]] or [[http://ambient.de/en/products/acn-cl-lockit-timecode-und-syncgenerator|AMBIENT Lockit]]
 with 3/8-16UNC Screw and anti-twist lock ([[de:techinfo:pinlock|Arri Pinlock]]) with retractable pins. with 3/8-16UNC Screw and anti-twist lock ([[de:techinfo:pinlock|Arri Pinlock]]) with retractable pins.
 ===== Usage ===== ===== Usage =====
 ==== Mounting the Bracket ==== ==== Mounting the Bracket ====
-Position the bracket so that the pins reach into the corresponding holes of the pinlock and screw tight. The use of a 4mm Allen key allows the screw to be “held”, but a slotted screwdriver such as is commonly used for tripod screws (“T-handle”) can also be used. +Position the bracket so that the pins align with the corresponding holes of the pinlock and tighten the screw. The use of a 4mm Allen key allows the screw to be “held”, but a slotted screwdriver, like a common “T-handle” used for tripod screws, is also suitable.
  
-If there is no Pinlock at the mounting position, the bracket can also be screwed against a closed surface without hesitation, the pins will automatically retract.+If no pinlock is present at the mounting location, the bracket can be securely screwed onto a closed surface without issue; the pins will automatically retract.
  
-When removing the bracket, it is advisable to push it slightly upwards to prevent the UNC screw from being unscrewed from the captive lock.+When removing the bracket, it is advisable to push it gently upwards to prevent the UNC screw from being unscrewed from the captive lock.
  
-To replace the screw, simply unscrew it upwards, pressing lightly from below if necessary to make it easier to engage the thread. Make sure that the screw sits straight in the thread; if it is too difficult to turn, do not continue screwing to prevent damage to the thread.+To replace the screw, simply unscrew it upwards. If needed, apply slight pressure from below to help the thread engage. Ensure that the screw is aligned straight within the thread; if it becomes difficult to turn, stop to avoid damaging the thread.
  
 <WRAP left round important 60%> <WRAP left round important 60%>
Line 26: Line 26:
  
 To remove, press the collet down and slide Lockit out sideways. Pay attention to the antenna and/or connected cables, especially with angled plugs.  To remove, press the collet down and slide Lockit out sideways. Pay attention to the antenna and/or connected cables, especially with angled plugs. 
-===== NanoLockit =====+===== NanoLockit Bracket =====
 {{:zeichnung_nanolockit.svg?600 |}} {{:zeichnung_nanolockit.svg?600 |}}
 +===== Lockit Bracket =====
 +{{:zeichnung_lockit.svg?600 |}}